To view archived messages, visit Our Old Board

or Visit the Goshen Timber Frames Website

HomePage PostMessage Topic ModifyMessage DeleteMessage SearchMessages FAQ
To Be Notified when a new message is posted Click Here


The Goshen Timber Frames Message Board
MESSAGE BOARD FORUMS Summary    ExpandAll Forums    Help                   
Timber Frame Design Timber Frame Employment Mountain Properties for Sale Timber Frame Raisings Timber Frame Tools Timber Frame Workshops
Sawmills Barns Vintage Lumber Other Lumber Alternative Building General Postings
Show messages created in the last:       View MsgList

Click here to start a new message topic Timber Frame Tools
[14 Messages ]    [LastPost: 02-25-2013 8:44 AM]
    Timber Framing Hand Tools For Sale
      Here is a list of tools currently available for sale.
      These tools have been cleaned, sharpen, honed, and had handles replaced with new strike end rings, and some have new protective covers over the business end.
      Tools for sale 3/24/04
      Slicks
      2” Underhill $90 (Cherry handle)
      Corner Chisels
      1” Fulton $50
      1” Douglas $50
      1” Parr $45
      7/8” Parr $45
      7/8” (no name) $45
      Framing Chisels
      2” (no name) $50
      2” (no name) $55
      1 ¼” Douglas $45
      2” Galtz $60
      1 ¾” (no name) $50
      1 ¼” (no name) $50
      1” Marples $45
      1” Union Hardware $50
      Draw Knives
      8” PS& Wilcox (folding) $47
      10” Straight $42
      Boring Machine Bits
      All bits are $20 each: 1 3/8”, (3)1 ¼”, 1 1/8”, 1”
      Misc.
      Boring Machine $165
      I hope you will take advantage of this offer, these are nice tools.
      If you would like a photo of the tool, and your email program will accept pictures, I can send you one, just let me know.
      All prices do not include shipping costs.
      Jim Rogers
      Jim Rogers Sawmill
      Tools@jrsawmill.com

      Name:Jim Rogers tools@jrsawmill.com, [Message Id=620152] *

    Must sell Mafell Tennoner
       Do to the collapse of my timber framing company, I am forced to sell off my tooling. Selling our Mafell Tennoner. This like new machine is a laser guided tenoner that can cut a tenon up to 60 degrees off center. With high speed cutters, it can complete a tenon in less than 30 seconds depending on size. 3 phase, we have a new voltage transformer on pallet that goes with it. Comes will all parts, and two cutter heads. We have $28,000.00 invested in a tool that was never set up and run at our shop because the shop was never completed. It can fit in a full sized truck... barely... it is about 600 pounds for the unit. Transformer is about 175... Have Phaze converter . Asking $7,000.00 for everything.
      Our loss is your gain! 

      Contact 360-649-2279 and ask for Lucas
      [Date=04-04-2012]    Name:Lucas Coleman Ph:3606492279 Landpiratesoffroad@gmail.com, [Message Id=2022495]

    Timber Framing Tools For Sale List 11-13-2010
      (Updated 11/13/10-PM)
      Here is a list of tools currently available for sale.

      These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

      Tools for sale

      Slicks

      1 3/4"--Douglas----------$105--2G
      3 5/8"--No Name----------$205--2Y
      3"-------Keller&Stocker----$195--3A
      3 1/2"--Barton-------------$215--3B
      3"------Beatty--------------$195--3D
      3"------Duerey--------------$225--3H
      2 5/8"--NoName------------$135-3i**+ (short handle)

      Corner Chisels

      1 1/8"--Cook--------$90--2w
      1 1/4"-PS&Wilcox-----$80--3g
      1"-----Hart------------$75--3h
      1"-----Unreadable-----$90--3i
      1"-----Hand-forged-----$65--3m
      1"-----Douglas---------$105--3n

      Framing Chisels

      1/2"-----Mortising Chisel---------$80--3A
      9/16"---Sorby (lock mortise type)--$75--4P
      7/8"-----Pexto-----------------------$70--4X
      2"-------Samson------------------------$90--6F
      1"-------Stanley Socket bevel edge-----$40--6M-1
      1"-------Stanley Socket bevel edge-----$40--6N-2
      1 3/4"--PS&W--------------------------$80--6V
      1 15/16"-Crossman--------------------$75--6X
      1"-------Union (New Old Stock)--------$70--7A
      1"-------Union (New Old Stock)--------$70--7B
      1"-------Union (New Old Stock)--------$70--7C
      1"-------Union (New Old Stock)--------$70--7D
      1 3/4"--Hart-----------------------------$70-7E
      2"------New Haven----------------------$95-7O
      2"------AW Crossman-------------------$90-7P
      3/4"---Paring chisel (no ring)--------$50-7Q**+ (not restored)
      1 1/2" Paring chisel (no ring)--------$75-7R**+ (not restored)
      2"----- Framing Chisel----------------$85-7T**+ (not restored)
      2"----- Framing Chisel----------------$85-7U**+ (not restored)
      2"----- Framing Chisel (no ring)-----$85-7V**+ (not restored)

      We also sell new leather sheaths/tip protectors for the above chisels and slicks.

      Here is a list of Sheaths currently available for sale.

      Sheathes Price List 6-7-08

      Plain Leather #102............... Sold out
      Plain Leather #102.5............. Sold out
      Plain Leather #103................ $14
      Plain Leather #103.5............. $18
      Plain Leather #104................ $18

      These are brand new.

      I hope you will take advantage of this offer, these are nice leather sheaths.
      If you would like to see photo of a sheath, just let me know, and I'll send you a link to the gallery of pictures.
      I have created an album and photos are there of all the sheaths.

      All prices do not include shipping costs. Shipping to most areas is $3 for one sheath.
      $4.95 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.

      Draw Knives

      10"-- Palmer(folding handle)----------$65-2H
      8"--- Greenlee--------------------------$65-2i
      8"----Nobles---------------------------$55-2K
      8"----Union-Sampson-----------------$55-2L
      10"--Jennings-Griffin-------------------$65-2M
      6"--Unknown-curved scoop blade-----$35-M213**
      6"--Buck Brothers-curved blade-------$75-M222**

      Boring Machines

      All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

      Snell #788--------$235-O4
      Ajax---------------$325-W4
      Millers Falls--------$675-D5
      Millers Falls--------$800-E5
      Ajax---------------$335-F5
      Ajax---------------$315-G5

      Boring Machine Bits

      All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

      1 11/16"-----60-@$25
      1 9/16"------7V-@$30
      9/16"--------8G-@$25
      1 1/4"-------8Q-@$30
      2 1/4"-------9M-@$25
      1 1/16"------10K-@$25
      1 3/8"-------10P-@$30
      11/16"-------10S-@$25
      11/16"-------11U-@$35
      5/8"---------11X-@$35 Swan
      1 3/4"-------11Y-@$30
      1 3/4"-------11Z-@$30 Ajax
      1 1/4"-------12W-1-$25
      1 15/16"-----12X-2-$25
      1 15/16"-----13J-14-$25
      3"-----------13Q-A-$50
      1 3/8"-------14H-E-$30
      1 3/4"-------14P-M-$30
      1 1/2" Ajax--14S-$25
      1 1/2" Ajax--14T-$30
      1" Ajax------14U-$30
      1 1/4"-------14W-2-$25
      2"-----------15E-D-$35
      1 1/2"-------15i-1-$30
      1 1/2"-------15J-2-$30
      1 1/2"-------15K-3-$30
      1"-----------15L-4-$25
      1 1/16"------15M-5-$20
      2"-----------15T-B-$40
      2"-----------16A-H-$40
      1"-----------16B-i-$40
      2"-----------16M-B-$40
      1"-----------16P-E-$40
      1"-----------16Q-F-$40
      1"-----------16R-G-$35
      1"-----------16S-H-$30
      15/16"-------16T-i-$25
      2"-----------16U-1A-$40
      1 1/2"-------16V-2A-$40
      1"-----------16W-3A-$35
      1"-----------16X-A-$40
      1 1/4"-------16Y-B-$35
      1 1/2"-------16Z-C-$25
      1 1/2"-------17A-D-$40
      2"-----------17B-E-$40
      2"-----------17C-F-$30
      2"-----------17D-G-$40
      1 7/16"------17E-1-$20
      2"-----------17F-2-$35
      1"-----------17G-3-$35
      1"-----------17H-4-$30 (long shank, new)
      1 1/2"-------17i-5-$35
      9/16"--------17J-$10 (short Jennings style 8 to 8 /12" long)
      11/16"-------17K-$10 (short Jennings style 8 to 8 /12" long)
      11/16"-------17L-$10 (short Jennings style 8 to 8 /12" long)

      Misc.

      Spoke shaves, other planes and other tools:
      Stanley #26 Jack Plane-----$45--M39
      Craftsman #6 plane----------$70--M75
      Jim's Slider----------------------$49--M86**
      Bit brace----------------------------$15-M129**A
      Bit brace----------------------------$15-M129**B
      Bit brace----------------------------$15-M129**C
      Bit brace----------------------------$12-M130**
      Bit brace----------------------------$15-M131**E
      Strop (for sharpening)--------------$10-M135(NEW)
      10" Bit brace-------------------------$22-M139
      Stanley #102 block plane-------------$20-M143**(as is, not restored)
      13/16" Rabbet plane-------------------$30-M147**
      1 1/4" Rabbet Plane---------------------$30-M155
      Race Knife-------------------------------$50-M158**
      Race Knife-------------------------------$50-M178**
      Base for Millers Falls boring machine(Cherry)-$85-M180(NEW)
      Broad Axe Handles -----------------$20-M184A(NEW)
      Auger bit handle-PS&W-------------------$15-M185
      T-Handles 4 augers (wooden, 12 on hand)-$2-M187A-L ($2 each)
      Race Knife---------------------------------$50-M188**
      Jack Plane #5-Stanley-Baily Pattern-------$70-M194(NEW)
      Jack Plane #5-Stanley-Baily Pattern-------$70-M195(NEW)
      Stanley 151 blade only---------------------$15-M196**
      Stanley 151 blade only---------------------$15-M197**
      2 1/2" T-Handle auger---------------------$50-M198
      9" Dividers---------------------------------$20-M200**
      Stanley Plane #45 (with cutters)-----------$185-M202** (11-straight-2-3/16, 1/4, 5/16, 2-7/16, 1/2, 5/8, 3/4, 7/8, 1 1/4") and (7 beading cutters #21, 22, 23, 24, 25, 26, 27)
      Adze handle (New #1 grade Hickory)-----$18-M204 (Flame hardened)
      Adze handle (New #1 grade Hickory)-----$18-M205 (Flame hardened)
      Adze handle (New #1 grade Hickory)-----$18-M206 (Flame hardened)
      Adze handle (New #1 grade Hickory)-----$18-M207 (Flame hardened)
      Adze handle (New #1 grade Hickory)-----$18-M208 (Flame hardened)
      2" Wooden rabbet plane "Roberts"-------$30-M211
      4 1/2" Dividers-----------------------------$15-M216**
      13 Irwin bits for brace, in a box case-------$84-M217** (#4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, a slotted screw driver and a counter sink reamer)
      5" Heath caliper------------------------------$10-M224**
      5" Starrett caliper------------------------------$10-M225**
      4" no name caliper------------------------------$10-M227**
      Stanley #55 spoke shave------------------------$26-M233**
      Wooden Dividers---------------------------------$32-M234**
      21" Dividers--------------------------------------$60-M240**
      Spoke Shave 151 style-round bottom----------$30-M241** (new)
      Spoke Shave 151 style-flat bottom-------------$35-M242** (new)

      Bit and Brace Bits:
      7/16" Shell Auger-$10-6G
      5/8" Shell Auger-$10-6H
      11/16" Ships Auger-$15-6i
      11/16" Ships Auger-$15-5J
      11/16" Ships Auger-$15-5K
      11/16" Shell Auger-$15-5L
      7/8" Shell Auger-long shank for boring machine-$10-16C**
      1"---Shell Auger-long shank for boring machine-$10-16D**
      7/8" Shell Auger-long shank for bit brace--------$10-16E**
      1"---Shell Auger-long shank for bit brace--------$10-16F**
      1"---Shell Auger-long shank for bit brace--------$10-16G**
      11/16"-Shell Auger-long shank for bit brace--------$10-16H**
      3/4"--Spur Auger-long shank for bit brace--------$30-16J**
      1 1/8"-Spur Auger-long shank for bit brace--------$10-16K**

      I hope you will take advantage of this offer, these are nice tools.
      If you would to see a photo of a tool, just let me know. I have created an album and some if not all of the tools have photos there. I can email you a link to the gallery where the pictures are.
      All prices do not include shipping costs.

      Jim Rogers
      email address use: Tools (at) jrsawmill (dot) com

      The id letter/number system after each tool price is my personal system to keep track of which item is which..
      [Date=11-13-2010]    Name:Jim Rogers Ph:978-352-9861 jrsawmill@verizon.net, [Message Id=1848541]

    10 inch saw needed
        I'm about 40% done on a 20 X 14 Goshen cabin project and in need of a 10 in circular saw for some of the deeper cuts (3 - 3 1/2in).  Interested in purchase or rental.  Only needed for 6 posts and 6 rafters.  Central KY area.
      [Date=01-12-2010]    Name:Jerry Adams Ph:859-771-5651 adams106@roadrunner.com, [Message Id=1729130]

    Looking for a good chisel, slick and bits
      Hello,
       
      I am just getting into timber frame construction and would like to try my hand at building a workshop and then a retirement house on a lake in Ontario Canada. I have been reading about the subject and many authers praise the older tools. So, if anyone has a few essentials tools for sale, I would be grateful in knowing about it. I am looking for a   slick (3 to 4 in.),  a 2 in. mortising chisel and the most popular bits for mortising  2 in. thick mortises. I would prefer if they had tapered chisel sockets for robustness. I newbie like me will likely be harder on tools than the pros!
       
      Any opinions sent my way with regards to other toos (i.e. boring machine vs a regular 1/2 drill) or other key tools would be greatly appreciated.
       
      Thanks and hoping to hear from someone.
       
      Ivan Filion

      [Date=04-12-2009]    Name:Ivan Filion Ph:705-560-3807 ifilion@idnor.ca, [Message Id=1610092]

    Timber Framing Tools For Sale List 9-27-08
      (Updated 9/27/08 )
      Here is a list of tools currently available for sale.

      These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

      Tools for sale

      Slicks

      1 3/4"--Douglas----------$105--2G
      2"-------Witherby---------$155--2L
      3"-------Humphrey--------$175--2M
      2 1/2"--White-------------$180--2P
      3"------Dover-------------$130--2S
      3 1/2"--No name-----------$160--2T*
      3 1/2"--Unreadable--------$125--2U

      Corner Chisels

      1 1/8"--Cook--------$90--2w
      7/8"----Unreadable--$60--2y
      1"------Ohio Tool---$90--3b
      1"------PS&Wilcox---$90--3c
      3/4"----Unreadable---$59--3e
      1"------Mix-----------$85--3f

      Framing Chisels

      1/2"-----Mortising Chisel---------$80--3A
      2 1/8"---Galtz--------------------$90--3i
      2"-------Barnard--------------------$105--4i
      1 3/4"--Witherby--------------------$70--4J
      2"-------PS&Wilcox------------------$95--4M
      2"-------PS&Wilcox------------------$90--4N
      2"-------Hart-------------------------$90--4O
      9/16"---Sorby (lock mortise type)--$75--4P
      2"------Pexto----------------------$105--4R
      1"------Hart-----------------------$70--4T
      2"------Douglas--------------------$80--4V
      2"------PS&Wilcox------------------$95--4W
      7/8"----Pexto----------------------$70--4X
      1"------Greenlee-------------------$60--4Y
      2"------Woodcraft------------------$80--5C
      2"------PS&Wilcox------------------$95--5E
      2"------Douglas--------------------$90--5G
      1 1/2"--Unreadable-----------------$70--5H
      2"------PS&Wilcox-----------------$90--5i
      1"------PS&Wilcox------------------$75--5J
      1 1/2"--Mix------------------------$82--5K

      We also sell new leather sheaths/tip protectors for the above chisels and slicks.
      Here is a list of Sheaths currently available for sale.

      Sheathes Price List 6-7-08

      Plain Leather #102............... $12 (currently sold out)
      Plain Leather #102.5............. $14 (currently sold out)
      Plain Leather #103................ $14 (currently sold out)
      Plain Leather #103.5DS......... $18
      Plain Leather #104DS............ $18

      These are brand new with a hard plastic insert that prevents the chisel or slick from cutting the leather when inserted.

      Some have been double stitched (DS).

      I hope you will take advantage of this offer, these are nice leather sheaths.
      If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know. I have created an album and photos are there of all the sheaths.
      Email me for details.
      Larger shots have been taken of each and they are available to be emailed to you.
      All prices do not include shipping costs.


      Draw Knives

      8"--Unreadable--------------------$25 - R
      12"-Unreadable--------------------$35 - S
      9"-Hibbard------------------------$45 - V

      Boring Machine Bits

      All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

      @$25 ea: 1 13/16"-60, 1 1/4"-7E, 1 1/4"-7G, 1 1/4"-8D, 9/16"-8G, 2 1/4"-9M, 1 1/16"--10K, 1 7/16"-10M
      @$30 ea: 1 9/16"-7V, 1 3/4"-8H, 1 1/4"-8Q, 1 15/16"-9C, 1 3/4"-9E, 1 15/16"-9N, 1 7/16"-10G, 1"-10O
      @$35 ea:
      @$40 ea: 2"-10H, 2"-10N**
      @$45 ea: 2"-10L

      Boring Machines

      All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

      1872 Phillips------$210-Q2
      Swan-adjustable-$225-J3
      Millers Falls-------$525-N3
      Swan-------------$185-Q3
      Swan-------------$185-R3
      Ajax-------------$325-S3 (with 1 1/2"& 2" bit, included)
      Ajax-------------$350-W3 (with 7/8", 1 1/2", & 2" bits included)

      Misc.

      Spoke shaves and other planes:
      Stanley 61-----------------$20--M36
      Stanley #26 Jack Plane-----$45--M39
      Sharpening Strops-----------$10--M54
      Stanley #6 plane-------------$70--M63
      Cabinet Maker vise-----------$30--M69 (no shipping available, pick up only)
      Sargent block plane----------$35--M72
      Craftsman #6 plane----------$70--M75
      5" Adze-------------------------$60--M82
      Stanley double cut spoke shave--$22--M83
      MF T-auger handle---------------$20--M85
      Jim's Slider--------------------$49--M86
      1 3/8" Rabbet Plane-------------$30--M89
      CraftsmanGC plane corrugated sole-$65--M90
      MF T-auger handle----------------$20-M91


      Bit and Brace Bits:
      7/16" Shell Auger-$10-6G; 5/8" Shell Auger-$10-6H, 11/16" Ships Auger-$15-6i; 11/16" Ships Auger-$15-5J; 11/16" Ships Auger-$15-5K; 11/16" Shell Auger-$15-5L

      Bit and Brace Bits; Not cleaned & Un-sharpened bits-all $1 each; sold as is:
      ¼" Pointed-5P; 3/8" Jennings-5R; 7/16" Irwin-5T; ½" Irwin-5U; ½" Irwin-5W; 9/16" Jennings-5X; 9/16" Jennings-5y; 9/16" Jennings-5Z; 5/8" Jennings-6A; 5/8" Jennings-6B; 5/8" Irwin-6D


      I hope you will take advantage of this offer, these are nice tools.
      Snapshots have been taken of most of the tools, and if your email program will accept pictures, they are available to be emailed to you, or I can point you to the gallery where you can view them, just let me know.
      All prices do not include shipping costs.

      Jim Rogers

      The id letter/number system after each tool price is my personal system to keep track of which item is which..

      [Date=09-27-2008]    Name:Jim Rogers Ph:800-422-6250 jrsawmill@verizon.net, [Message Id=1510973]

           UK enquiry
      Can you export to the UK?
       
      We are setting up our own timber frame business.
       
      Wealso require chain mortiser, beam planer, beam saw etc as well as the nice hand tools you have here.
       
      Could you do a package?
       
      Regards
       
      Mark Swan

      [Date=07-17-2008]    Name:Mark Swan Ph:01297 442789 mark@swancountryhomes.co.uk, [Message Id=1476546]

    Timber Framing Tools For Sale

      (Updated 5/2/08)
      Here is a list of tools currently available for sale.

      These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

      Tools for sale

      Slicks

      1 3/4"--Douglas----------$105--2G
      3"-------Hunter-----------$160--2K
      2"-------Witherby---------$155--2L
      3"-------Humphrey--------$175--2M
      3'-------PS&Wilcox--------$160--2O
      2 1/2"--White-------------$180--2P
      3"------L&IS White--------$170--2Q

      Corner Chisels

      1 1/8"--Cook--------$90--2w
      1"------Mix---------$95--2x
      7/8"----Unreadable--$60--2y
      1"------Parr--------$95--2z
      1"------Hart--------$75--3a
      1"------Ohio Tool---$90--3b

      Framing Chisels

      1/2"-----Mortising Chisel---------$80--3A
      2 1/8"---Galtz--------------------$90--3i
      2"-------Barnard--------------------$105--4i
      1 3/4"--Witherby--------------------$70--4J
      2"-------PS&Wilcox------------------$95--4M
      2"-------PS&Wilcox------------------$90--4N
      2"-------Hart-------------------------$90--4O
      9/16"---Sorby (lock mortise type)--$75--4P
      2"------Pexto----------------------$105--4R
      2"------Holman---------------------$85--4S
      1"------Hart-----------------------$70--4T
      1 1/2"--Mix------------------------$75--4U
      2"------Douglas--------------------$80--4V
      2"------PS&Wilcox------------------$95--4W
      7/8"----Pexto----------------------$70--4X
      1"------Green Lee------------------$60--4Y
      1 1/2"--Hubbard--------------------$105--4Z
      1 1/2"--Underhill------------------$80--5A
      1 1/2"--Unreadable-----------------$75--5B
      2"------Woodcraft------------------$80--5C
      2"------Witherby-------------------$90--5D
      2"------PS&Wilcox------------------$95--5E

      We also sell new leather sheaths/tip protectors for the above chisels and slicks.
      Email me for details.

      Draw Knives

      8"--Wilkinson(folding handles)----$40 - P
      8"--Unreadable--------------------$25 - R
      12"-Unreadable--------------------$35 - S
      8"--Keen Kutter-------------------$40 - T
      8"--Waldrous (adjustable handles)-$30 - U

      Boring Machine Bits

      All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

      @$25 ea: 1 15/16"-5H, 1 13/16"-60, 1 1/4"-7E, 1 1/4"-7G, 1 1/4"-8D, 9/16"-8G, 2"-8i, 2 1/4"-9M
      @$30 ea: 1 9/16"-7V, 1 3/4"-8H, 1 1/2"-8K, 1 1/4"-8Q, 1 15/16"-9C, 1 3/4"-9E, 1 15/16"-9N
      @$35 ea: 1 1/2"-9O, 1 1/2"-9P, 2"-9Q
      @$40 ea: 1 1/2"-7O, 1 1/2"-8M, 2"-8P, 1 1/2"-9i, 1 1/2"-9S, 1 1/2"-9T, 2"-9U, 2"-9V, 2"-9W, 2"-9X, 2"-9Z, 2"-10A, 1 1/2"-10B

      Boring Machines

      All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

      1872 Phillips------$210-Q2
      Unknown---------$220-G3
      Swan-adjustable-$225-J3
      Millers Falls-------$525-N3
      Swan-adjustable-$205-P3
      Swan-------------$185-Q3
      Swan-------------$185-R3
      Ajax-------------$325-S3 (with 1 1/2"& 2" bit, included)

      Misc.

      Spoke shaves and other planes:
      Stanley 61-----------------$20--M36
      Stanley #26 Jack Plane-----$45--M39
      Stanley #51 spoke shave---$25--M44**
      Sharpening Strops-----------$10--M54
      Stanley #6 plane-------------$70--M63
      Cabinet Maker vise-----------$30--M69 (no shipping available, pick up only)
      Simmons #4-----------------$70--M70
      Sargent block plane----------$35--M72
      Millers Falls plane #9C--------$55--M73
      Stanley #5 plane-------------$60--M74
      Craftsman #6 plane----------$70--M75
      1 1/2" Rabbet Plane------------$35--M76
      Stanley 151 spoke shave------$35--M79
      3 3/4" Adze--------------------$65--M81
      5" Adze-------------------------$60--M82
      Stanley double cut spoke shave--$22--M83
      Stanley 151 spoke shave---------$35--M84
      MF T-auger handle---------------$20--M85
      Jim's Slider--------------------$60--M86
      2" Rabbet Plane-----------------$45--M87
      1 3/8" Rabbet Plane-------------$25--M88
      1 3/8" Rabbet Plane-------------$30--M89
      CraftsmanGC plane corrugated sole-$65--M90

      Bit and Brace Bits:
      7/16" Shell Auger-$10-6G; 5/8" Shell Auger-$10-6H, 11/16" Ships Auger-$15-6i; 11/16" Ships Auger-$15-5J; 11/16" Ships Auger-$15-5K; 11/16" Shell Auger-$15-5L

      Bit and Brace Bits; Not cleaned & Un-sharpened bits-all $1 each; sold as is:
      ¼" Pointed-5P; 3/8" Jennings-5R; 7/16" Irwin-5T; ½" Irwin-5U; ½" Irwin-5W; 9/16" Jennings-5X; 9/16" Jennings-5y; 9/16" Jennings-5Z; 5/8" Jennings-6A; 5/8" Jennings-6B; 5/8" Irwin-6D


      I hope you will take advantage of this offer, these are nice tools.
      Snapshots have been taken of most of the tools, and if your email program will accept pictures, they are available to be emailed to you, or I can point you to the gallery where you can view them, just let me know.
      All prices do not include shipping costs.

      Jim Rogers

      Vintage Tools NE

      The id letter/number system after each tool price is my personal system to keep track of which item is which..


      [Date=05-06-2008]    Name:Jim Rogers Ph:800-422-6250 jrsawmill@verizon.net, [Message Id=1430156]








List Of Message Titles
     Top

(Click here to view messages in Threaded format)
Forum/Message Title Date Posted Name
TIMBER FRAME TOOLS     
      Timber Framing Hand Tools For Sale    Jim Rogers   
      Tools    02-25-2013 John wight   
      Timber Framing Tools for Sale    10-15-2012 Ralph Lipeles   
      MORTISER    07-26-2012 phil Swank   
      Must sell Mafell Tennoner     04-04-2012 Lucas Coleman   
      Makita Mortise Machine    01-25-2011 Dean Smith   
      Millers Falls Boring Machine    12-26-2010 john   
      Timber Framing Tools For Sale List 11-13-2010    11-13-2010 Jim Rogers   
      10 inch saw needed    01-12-2010 Jerry Adams   
      Looking for a good chisel, slick and bits    04-12-2009 Ivan Filion   
      Boring Machine    03-11-2009 john pimental   
      Timber Framing Tools For Sale List 9-27-08    09-27-2008 Jim Rogers   
      UK enquiry    07-17-2008 Mark Swan   
      Timber Framing Tools For Sale    05-06-2008 Jim Rogers   








Legend  (Your Last Visit: 27 Nov 2014 12:16)
No new posts since last visit
New posts added since last visit
Indicates a reply to a message topic

Create button Modify button Delete button Search button Home button Frequently Asked Questions
This board has been viewed 337873 times since Jan-07-2004 .
(Total Views Since Board Creation on Jan-07-2004 is 337880.)


LogOut

Questions about this board, email: bonnie@goshenframes.com

Optimum viewing of this board requires that Cookies be enabled.
If you have problems viewing this board Click Here




Tech Support: support@bulletinboards.com   (321) 984-9080
Board Management page: Click Here

© 1997 - 2011 P.A. Corp. V9.0





  Click Here to have all links open in a secondary window